PWT Treated LVL in Missouri gives homeowners and contractors a stronger, rot-resistant engineered wood beam for deck framing. Treated uniformly from the inside out using TRU-CORE technology, it outperforms standard pressure-treated lumber in strength, stability, and long-term structural reliability.
25+ Years
5 Options
95% Recycled
Complete technical specifications & installation manual
PWT Treated LVL is the only fully treated LVL engineered for superior strength, rot resistance, and long-term structural performance.
PWT's patented TRU-CORE technology treats the entire LVL cross-section uniformly, with no untreated core, complete rot and insect protection throughout.
Grain-aligned veneers bonded under heat and pressure create a stronger, straighter beam that spans further with fewer intermediate posts.
No end-cut preservative required after on-site cuts or drilling, just coat exposed holes with sealer where moisture is a concern.
PWT's PTI chemical system won't corrode metal hardware or connectors, and uses standard structural fasteners without risk of chemical reaction or degradation.
Backed by one of the strongest warranties in the industry
25-Year Limited Fade & Stain Warranty
25-Year Limited Structural Warranty
Premium materials engineered for lasting performance
PWT Treated LVL is the engineered framing choice for Missouri homeowners and contractors who need a stronger, fully rot-resistant beam.
25+
Year Warranty
95%
Recycled
0
Maintenance
Follow these five key practices for a safe, code-compliant PWT-treated LVL installation on any Missouri deck project.
Keep PWT LVL wrapped, elevated, and stacked before installation to protect moisture content and prevent swelling on Missouri job sites.
No end-cut treatment is required, but coat all drilled holes and exposed cut areas with sealer or paint where moisture contact is a concern.
PWT LVL does not corrode hardware, but always verify connector coatings are rated for exterior or high-humidity framing environments before installation.
All PWT LVL beams require continuous lateral restraint of the compression edge, maximum unbraced length of 24 inches, provided by anchored sheathing or framing.
Never size LVL beams from memory. Always reference PWT span charts and design values to confirm load capacity and full code compliance on every Missouri project.
Whether you are a homeowner or contractor, Top Deck supplies PWT Treated LVL with the specs and support your Missouri project needs. Contact us today for availability, pricing, or expert sizing guidance.